 |
|
|||
|
|
||||
|
Home
Our Products
Advantage
History
System
FAQ
PDF
Contact Us
Find Us
|
||||
|
|
||||
|
|
The Spider™ DROP-IN™ Damper is 316-L stainless construction will withstand repeated chimney fires and will not melt like aluminum designs. The recessed design does not induce additional turbulence at the flue’s termination point or interact with the prevailing wind. All clay flue tile sizes, round single wall, flexible flue liners, class A solid pack, and air insulated factory flues are accommodated. Installation is simple and damper is recessed approximately 6 inches below the flue’s termination point–ideal for restoration projects where an exposed damper is objectionable. A rain cover of your choice can now be installed over it–without fear of a freezing or sticking damper. The Spider™ DROP-IN™ Damper is the ultimate replacement for worn-out, warped and defective factory-built zero clearance dampers. Available in all round sizes: 6 to 24-inch. The Spider™ DROP-IN™ Damper is now the standard damper for the Bellfires Refractory Fireplace. The DROP-IN™ Damper model offers a spring loaded damper that will allow unlimited adjustment to the open positions of the damper. | |||
 |
 |
|||
Spider™ DROP-IN™ Damper in Open Position |
Spider™ DROP-IN™ Damper in Closed Position |
|||
| Prices are U.S. and subject to change depending on market conditions | ||||
 |
||||
|
If you would prefer to order by phone, or have
questions, please call
|
||||
|
Home
Our Products
Advantage
History
System
FAQ
PDF
Contact Us
Find Us
Mantels Distributors Installers Order Contractor Order Form |
||||
